NAD C368 stereo stiprintuvas su DAC funkcija

Key Features

80W x 2 Continuous power into 8 or 4 OhmsBluetooth A2DP with aptX supportedMM Phono inputAnalogue line inputsSPDIF coax and optical inputsSpeaker A, Speaker BStereo or Bridge mode configurationPreamp/Subwoofer outHeadphone amplifierMDC Slots for future upgradesIR RemoteSmartphone Control App12V Trigger in/outIR in/outRS-232 Serial port for controlControl4, Crestron, RTI, URC, AMX, Savant, Elan certified

Preamplifier

Line Input, Pre Out

THD (20Hz-20kHz)<0.005% at 2V outSignal/Noise Ratio>106dB (IHF; A-weighted, ref. 500mV out, unity gain)Channel Separation>80dB (1kHz); >70dB (10kHz)Input Impedance (R and C)22 kilohm + 100pFMaximum Input Signal>4.5Vrms (ref. 0.1% THD)Output ImpedanceSource Z + 240 OhmInput Sensitivity93mV (ref. 500mV out, Volume maximum)Frequency Response±0.03dB (20Hz-20kHz)Maximum voltage output – IHF load>4.5V (ref. 0.1% THD)Tone ControlsTreble: ±7.0dB at 20kHz

Bass: ±7.0dB at 60Hz

Balance: -10dB

Phono Input, Pre Out

THD (20Hz-20kHz)<0.01% at 2V outSignal to Noise Ratio>84dB (200 Ohm source; A-weighted, ref. 500mV out)

>76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)Input Sensitivity1.44mV (ref. 500mV out, Volume maximum)Frequency Response±0.3dB (20Hz-20kHz)Maximum Input Signal at 1kHz>80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

THD (20Hz-20kHz)<0.005% at 1V outSignal/Noise Ratio>110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)Frequency Response±0.3dB (20Hz-20kHz)Channel Separation>60dB at 1kHzOutput Impedance6 Ohms

General Specifications

Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)>80W (ref. 20-20kHz at rated THD, both channels driven)Continuous Output Power into 8 Ohms (Bridge Mode)300W (at 20-20kHz at THD 0.03%)THD (20Hz-20kHz)<0.03% (250mW to 80W, 8 Ohms and 4 Ohms)Signal to Noise Ratio>98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)Clipping Power>95W (at 1kHz 0.1% THD)Clipping Power (Bridge Mode)>315W (at 1kHz 0.1% THD)IHF Dynamic Power8 Ohms 120W

4 Ohms 200W

2 Ohms 250WIHF Dynamic Power (Bridge Mode)8 Ohms 500W

4 Ohms 560W

Peak Output Current>20A (in 1 Ohm, 1ms)Damping Factor>300 (ref. 8 Ohms, 20Hz and 6.5kHz)Frequency Response±0.3dB (20Hz-20kHz)Channel Separation>75dB (1kHz)

>70dB (10kHz)Input Sensitivity (for 80W in 8 Ohms)Line In: 470mV; Digital In: 21% FSSample Rateup to 24 bit/192kHzFrequency Band2.402G-2.480GMaximum Transmit Power (dBm)7dBm ±2dBm

Power Consumption

at Auto Standby ON and Network Standby OFF0.5 Watts*at Auto Standby ON and Network Standby ON1.2 Watts**OFF mode (Power switched OFF)0.1 Watts

* – After 20 minutes of no user interface interaction and no active source input

** – With established wireless Bluetooth connectivity and 20 minutes of no user interface interaction and no active source input

NOTE: Bluetooth connectivity is always live when configured

Weight & Dimensions

Gross Dimensions (W x H x D)*435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”Net Weight7.8kg (17.2lb)Shipping Weight10.1kg (22.3lb)

*Gross dimensions include feet, extended buttons and rear panel terminals