5020
Bookshelf Speaker
Experience all the scale and power of your favourite music without letting your loudspeaker dominate your room. The 5020 standmounting speaker will put your right in the heart of the music without putting itself at the heart of your space.
Mid/bass driver design
At the heart of the ground-up mid/bass driver design is the C3 Continuous Curved Cone™. The cone’s geometry requires good motor strength for optimal performance. Substantial magnets are coupled to large voice coils to increase motor strength - the result is a 50% increase in power handling and control over a comparable driver with 25.4 mm voice coil. The result is an improvement in the dynamic range of the speaker, especially in the bass region.
High-frequency driver design
Based on the tweeter design principle found in the newest Concept series, the high frequency driver unit is hermetically sealed and mechanically isolated (floating) from the baffle to prevent internal pressure modulations from within the cabinet and adjacent mid/bass driver. The inner chamber is also carefully vented for lower distortion, with a lower crossover point for seamless integration through the crossover region.
C3 Continuous Curved Cone™
A genuine advancement in elements of mid/bass driver design, the C3 Continuous Curved Cone™ profile is the result of extensive research and expert engineering to combine the bass performance benefits of a traditional straight conic cone with the high/mid-range frequency control of a flared cone.
By creating a single, smooth, continuous curve profile, the advantages are clear. Its excellent dispersion, alongside its well-controlled frequency response and reduced harmonic distortion, enables smoother integration with the tweeter. Deep bass dynamics are also superior, with this and tighter, damped low-end sound allowing more flexibility in in placement of speakers near the wall boundaries of the listening room.
SPECIFICATIONS
Bass unit1 x 125 mm (5.0 in)
Treble unit1 x 25 mm (1.0 in)
Frequency response(-6dB) 53 Hz - 30 kHz
Nominal impedance 6 Ω
Minimum impedance 3.3 Ω
Sensitivity (2.83V @ 1kHz)87.9 dB/w/m
Recommended amplifier power25-100 W
Crossover frequency 2.5 kHz
Effective volume6.8 L
Dimensions (per loudspeaker / HxWxD)284 x 180 x 293 mm (11.2 x 7.1 x 11.5 in)
Weight (per loudspeaker) 7.0 kg (15.4 lbs)
- Prieinamumas: Sandėlyje
- Modelis: Q Acoustics Q5020
- SKU: pora
-190x190h.jpg "Q Acoustics 3000i stovai kolonėlėms")
